Did You Know Facts

I have been hearing more and more about a waterproofing membrane for under resilient flooring being written into project specifications. Mapei has a procedure for doing this:

Waterproofing under resilient

Luxury Vinyl Tile, Luxury Vinyl Plank, Homogeneous Sheet Vinyl, or VCT-  Apply Mapelastic AquaDefense then skim coat with either Mapecem Quickpatch or Planiprep SC. Then install the Luxury Vinyl Tile, Luxury Vinyl Plank, or Homogeneous Sheet Vinyl with MAPEI ECO 360 and install VCT with MAPEI ECO 711.

Need to know what the moisture requirements are for flooring products? Wagner has a free App for your phone called RH Spec. You can select the Product Type, Adhesive, Flooring, or Remediation. Then you select the product, then select Get Product Info and it takes you to the manufacturer’s website that has the moisture requirements for that manufacturer.

Did you know that JJ Haines now sells the following Moisture Tests?

We now sell Heat Welding Guns:

In a previous article, Dealing with Adhesive Residue, I left off 2 additional solutions for dealing with non-water-soluble adhesives.

Mapei Eco Prim Grip

ECO Prim Grip is a ready-to-use, low-VOC, synthetic resin-based primer with bond-promoting silica aggregates suspended in a dispersion. It enhances the performance and adhesion over well bonded existing non-water-soluble adhesive residue, floor covering adhesive residue and polyurethane adhesive residue. Prepare the existing adhesive residue and apply the Eco Prim Grip and let dry. If the new flooring adhesive is allowed to go dry to the touch, it may be applied directly to the Eco Prim Grip. If the new adhesive is a wet set adhesive, the Eco Prim Grip must be first skim coated with Mapei Planiprep SC.

Mapei Primer T

Primer T is a low-VOC, water-based acrylic primer that enhances the performance and adhesion of self-leveling underlayments on nonabsorbent surfaces such as ceramic tile, vinyl composition tile, epoxy moisture barriers and non-water-soluble adhesive residue, as well as profiled, absorbent surfaces. Suitable for a wide variety of substrates, Primer T combines excellent versatility with an easy, low-odor application. Prepare the existing adhesive residue and apply the Primer T and let dry. If the new flooring adhesive is allowed to go dry to the touch, it may be applied directly to the Primer T. If the new adhesive is a wet set adhesive, the Primer T must be first skim coated with Mapei Planiprep SC.

Vinyl Backed Flooring Adhesives

One point I would like to mention is that when installing any vinyl backed flooring and Luxury Vinyl Tile such as Armstrong StrataMax/Fiberglass and IVC Floors with the full spread method of installation, you CAN NOT set the flooring into the adhesives wet over Non- porous structures (i.e existing resilient flooring/ceramic tile). The adhesive must be allowed to dry to the touch. There is nowhere for the moisture of the adhesive to go and it will remain wet forever, leading to bubbles in the flooring and severe indentation.

JJ Haines now sells Flash Coving Supplies – Cove Stick, Cove Cap, & Reinforced Power Tape

Looking for a quick and effective solution to high moisture issues?

VersaShield Rolled Moisture Barrier protects against moisture in concrete, and it is very cost effective. Its fiberglass-reinforced membrane is a superior alternative for moisture remediation at high RH (relative humidity) sites. Click on the link to see videos of how easy this is. http://www.versashield4floors.com/expert-videos.html

VersaShield makes installation quick and easy, unlike most moisture mitigation methods, which require days of downtime for prep, application, and curing. VersaShield 95 protects against moisture in concrete slabs up to 95% RH and VersaShield MBX protects up to 99% RH.

VersaShield’s polymer film coating on the underside of the patented fiberglass reinforced membrane provides moisture suppression. The unique mineral top-coat allows the installer to adhere the chosen floor covering to the VersaShield surface. VersaShield’s dimensional stability means it stays flat on the slab. VersaShield separates the finished flooring and adhesive from moisture vapor in the concrete subfloor.

VersaShield is approved for use with carpet tiles, most wide-width carpets, engineered hardwood, laminates and resilient (VCT, SDT, SVT and LVT) flooring products.

VersaShield saves money in both time and material. It is quick and easy to install! Just roll it out, tape the seams, cut it in and you are ready to install the finished flooring. No waiting for shot blasting, chemical cure time, complicated installation mixing and application steps or additional moisture testing.

Gypsum Underlayments

When dealing with Gypsum Underlayments like Gypcrete, these products are not made to have 1/4′′ wood underlayment panels attached to them. Flooring is to be installed directly to the Gypsum Underlayments after the Gypsum Underlayment has been primed or sealed per the Gypsum Underlayment manufacturers. Stapling a 1/4′′ wood underlayment into the Gypsum Underlayment can ruin the integrity of the Gypsum and the staples will have no holding power resulting in the wood underlayment making “popping” sounds beneath it and also with the wood underlayment panels not being secure to the subfloor resulting in a failed installation.